April 14, 2020 By:

The default value of this item is auto-detected by BIOS. Dual-core processors contain two physical CPU cores with dedicated L2 caches to meet demands for more powerful processing. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot. Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. The User Password item on top of the screen shows the default Not Installed. Line Out port 8.

Uploader: Samurg
Date Added: 8 September 2017
File Size: 51.67 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7104
Price: Free* [*Free Regsitration Required]

Take caution when asuw the settings of the Advanced menu items. Connect the chassis power LED cable to this connector.

The communications port COM2 is an optional item.

The DIMM might get damaged when assus flips out with extra force. Secure the card to the chassis with the screw you removed earlier. Disconnect the CPU fan cable from the connector on the motherboard. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled.


No more DOS-based flash utility and bootable diskette required. Sata Mode Selection Configuration options: Please refer specification pages for full details.

Page of 68 Go. This PSU type has pin and 4-pin power plugs.

P5SD2-VM | Motherboards | ASUS Global

These values are not user-configurable. The figure shows a network card installed on the PCI Express x1 slot. If an invalid ratio is set in Ashs then actual and setpoint values may differ. When set to Auto, the data transfer from and to the device occurs multiple sectors at a time if the device supports multi-sector transfer feature.

ASUS P5SD2-FM/S, LGA 775/Socket T, Intel Motherboard

Select Yes to discard any changes and load the previously saved values. For example, selecting Main shows the Main menu items. Line Out port 8. The BIOS automatically detects the items in this menu. Press the load lever with your thumb Athen move it to the left B until it is released from the p5sx2-fm tab. To set a User Password: Rotate each fastener counterclockwise.

When finished, shut down your computer. Pull up two fasteners at a time in a diagonal sequence to disengage the heatsink and fan assembly from the motherboard. This port connects a headphone or a speaker. This jack connects to external audio output devices. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.


The number of device items that appears on the screen depends on the number of devices installed in the system. The system may become unstable or may not boot up if the power is inadequate.

Connect the 3-pin power LED cable from the system chassis to this connector. If you attempt to exit the Setup program without saving your changes, the program prompts you with a message asking if you want to save your changes before exiting.

Asus P5SD2-FM Hardware User Manual

Failure to do so may cause you physical injury and damage motherboard components. Page 11 This chapter lists the hardware setup procedures that you have to perform when installing system components. This jack connects to external audio output devices.